To allow for greater and more specific customization of your setup, tubing is not included.
Recommended tubing:
- PUMP INLET: Polyvinyl Chloride Plastic
- PUMP OUTLET:
- RESERVOIR OUTLET: Polyvinyl Chloride Plastic
ALL ORDERS ARE CUSTOM MADE AND PROCESSING TIMES VARY PER ORDER. PLEASE READ THE RETURN/REFUND POLICY AND WARRANTY POLICY BEFORE PURCHASING.
NOT FOR USE WITH FLAMMABLE OR HAZARDOUS FLUIDS. ONLY USE FLUID AS SPECIFIED BY YOUR EFFECT MACHINE'S PRODUCT GUIDELINES.
Additional Notes:
- Tube reducers may be required for connecting the reservoir to specific effect machines.
- The maximum fluid push capability of the EFR Reservoir 4.5 has currently only been tested at a distance of 145 feet away from the pump, reaching 45 feet in the air and an additional 100 feet away from the peak. However, mathematical calculations support the potential for even greater distances. Keep in mind that high altitude fluid push may result in reduced flow rate and efficiency. The maximum distance of use is dependent on a variety of factors including, but not limited to, fluid type, tubing type and size, ambient and fluid temperature, connecting cable wire gauge, and more. For detailed information, please refer to the operator's manual. To ensure optimal performance, all relevant variables should be considered when planning your setup. The use of quick connect/link adapters is not recommended.
- The pump and reservoir both have check valves at their outlets to prevent backflow. Any inline check valves in the tubing should have a minimum opening pressure of 1 and a working pressure of 60PSI or higher.
